Description
The PoE splitter supplies data and power via a single Ethernet cable to devices that do not support Power over Ethernet. Simply connect the input of the splitter to a PoE switch or PoE injector and the output side to a non-PoE network device such as an access point, IP phone or camera to provide power and data. The extender is self-powered via PoE, so no additional power supply is required. The output voltage can be regulated to 12V or 24V via a dip switch. This splitter extends your network wherever you want to place network devices for which no sockets are available. are available.
Technical details
- Ethernet speed: 10/100/1000Mbps Gigabit half/full duplex
- PoE standard: IEEE802.3at/bt
- Input: Power + data input (RJ45)
- Output: Data output (RJ45), DC output
- Plug-and-play installation - no configuration required
- Selectable output voltages: 12V/4.25A, 24V/2.125A
- Splits the 48VDC power into different DC outputs via RJ45 Ethernet cable
- Status LED on the device (PoE ready/PoE in operation)
- Protection through insulation of the circuit
- Maximum output power up to 51W
- Supports a wide input voltage range from 36VDC to 57VDC
- Supports 5.5 mm and 3.5 mm DC connections
- Thermal shutdown
- Operating temperature: 0 to 40°C
- Dimensions (L x W x H): 80 x 55 x 23 mm
- Color: Black
- Weight: 80g
- Number of ports: 1
- PoE standard: IEEE802.3bt (PoE++)
- Ethernet speed: Gigabit
- Industrial usage: no
Package content
- 1x Gigabit PoE distributor
- 1x QIG
- 1x RJ45 Ethernet cable
- 1x DC power cable
Logistics
Number (pcs) | Weight (kg) | Depth (cm) | Width (cm) | Height (cm) | cm³ | |
---|---|---|---|---|---|---|
Packaging Unit Carton | 100 | 15,50 | 31,70 | 27,80 | 54,50 | 48.028,67 |
Packaging Unit Inside | 1 | 0,16 | 0,00 | 0,00 | 0,00 | 0 |
Packaging Unit Single | 1 | 0,16 | 2,50 | 10,50 | 15,00 | 393,75 |
Customs tariff number:
8544421000